1.Materials should be stored in dry and well ventilated warehouse, if outdoor storage, rain and sun protection is needed.

2.The storage site should be strong and level, avoiding the materials deform and damage resulting from uneven force.

3.Materials trample is prohibited, avoiding the materials damaged and broken.

4.Please note the below points when receiving the containers and unloading the materials:

1)The customer should check the materials’ quantity based on the & provided by supplier.

2)If the materials damage or shortage happens, the customer should take the photos at the first time and feedback to the supplier for check on the same date.

5.Please see below the storage guide for each type of materials:

1)steel components：
1.The steel components of same label code should be stacked together in good order, which is easy for the quantity check and the materials looking for.

The right way （√）
The wrong way（х）

2.The K house door frame should be protected from heavy objects’ pressure, avoiding the materials deform.

The right way （√）

2.sandwich panel
1)Sandwich panels should be stored in dry and well ventilated warehouse, if outdoor storage, rain and sun protection is needed.

Indoor storage （√）	Outdoor storage （√）

2)The storage site should be strong and level, avoiding the materials deform and damage resulting from uneven force; the stacking height should be less than 2.0 meters; it is advised use the wood or foam on the bottom to protect the sandwich panel surface from scratching, the distance between two woods or foams should be less than 2.5 meters.

The right way （√）	The wrong way （√）

3)Materials of same specification should be stacked together in good order and prohibit from trample, avoiding the materials damage and break.

The right way （√）	The wrongt way （√）

4)Please note that the materials should be keep far from heat, fire and chemicals.

3.windows
1)Window frame: it can be stacked in parallel or in vertical, when stacked in parallel, the stacking height should be less than 2.0 meters, avoiding the window frame deform.

2)The window glass should be stacked in vertical based on the label’s instruction, it should not keep flat, avoiding the glass break.

The right way （√）
The wrong way（х）

4.plywood & fiber cement board
1)The plywood should be protected from sun and rain;
2)The storage site should be strong and level, avoiding the materials deform and damage resulting from uneven force;
3)The fiber cement board is prohibited from trample, avoiding the materials break;
4)For the materials convenient transfer, the bottom can add wood to support, the distance between the woods should be less than 800mm;

5.steel sheet fittings
1)The fittings with same specification should be stacked together in good order, avoiding the materials disorder and miss;

The right way （√）	The wrongt way （√）

6.hardware
1)The fittings with same specification should be stacked together in good order, avoiding the materials disorder and miss;

The right way （√）